9 thoughts on “Pibow modification files available

  1. william

    that’s excellent. thank you.

    this is only for a hifiberry with RCA, correct?
    Any chance for one with 3.5mm?

    Reply
    1. Daniel Post author

      We will also release the OpenSCAD files, this should allow other to modify the layers.

      Reply
  2. william

    Also, I see there are screws holding the layers together (I’ve never used a Pibow case).
    Are these available to purchase? Or what kind of screws are recommended?
    Thank you.

    Reply
    1. Daniel Post author

      We don’t sell any parts for this. The screws are just normal M3 screws of the specific length. The easiest way is using threaded rods and cut them to the necessary length.

      Reply
    1. Daniel Post author

      No, it won’t because the output transformer needs extra space. We will release the OpenSCAD files, this should allow other to modify the layers.

      Reply
      1. Chris Mitchell

        Ah, thanks for that. I’ll have a look at the files when they become available…

        Chris M

        Reply
  3. Tobias

    Hi,

    the stl files are in the pc of the company were I am working. They are on the waiting list for the delta tower right now. I will report when the print is finished.

    Greets,
    Tobias

    Reply
  4. Ramón

    Hello,

    Great job!

    i’m looking the same for the hifiberry Digi. Is this case compatible? Some cases available for Raspberry Pi + Hifiberry Digi?

    Thanks

    Reply

Leave a Reply