Sincos stop working, help needed…

Home Forums SinCos Sincos stop working, help needed…

This topic contains 2 replies, has 2 voices, and was last updated by  Jorge Domingo 4 years, 7 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #3532

    Jorge Domingo
    Participant

    Hi,

    After some work I managed to finish the Sincos turntable power supply. It has been working fine for more than a month, but after hearing some records, when I swapped a disc to listen the b side, the platter started to run very slowly.

    I took a look to the PCB and the green led that was before pulsating, now is always lit, like the yellow one.

    Any clues where to look at?

    Regards,

    Jorge Castellano

    #3567

    Daniel
    Keymaster

    Looks like the shutdown timer. This is usually configured at 40 minutes or so. Powering off/on should help here. You can configure this time in the menu if you have an LCD and buttons connected.

    Best regards
    Daniel

    #3569

    Jorge Domingo
    Participant

    Hi Daniel

    Thank you very much for answering.

    1.- Power on/off does not work.

    2.- I can not use a LCD nor buttos due to (alhtough I tried my best) I couldn´t figure out how to connect them. I am still needing the wiring diagram….

    3.- The software posted in your website makes wird things in Windows 8.1. Is it compatible with this O.S.? Also, which of the files is the main executable?

    Regards,

    Jorge

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.