This is the list of electronic parts needed to build the Shunt voltage regulator. Note that the links to suppliers should help you to find the right components. However we have no control over their inventory. Therefore it is possible that some of the parts are not available anymore or (even worse) some parts have been changed. Therefore it is important, that you check again that you order the right components.
| Quantity | Parts | Value | Package | DIGIKEY | REICHELT |
| 2 | C5, C15 | 100nF | C050-030X075 | P4525-ND | MKS-2 100N |
| 4 | C2, C4, C10, C12 | 100uF/25V | electrolytic capacitor, 5mm spacing, max diameter 10mm | EEU-FR1J101 | RAD FC 100/50 |
| 6 | C1, C9, C6, C7, C13, C16 | 100uF/50V | electrolytic capacitor, 5mm spacing, max diameter 10mm | EEU-FR1J101 | RAD FC 100/50 |
| 2 | C3, C11 | 470uF/25V | electrolytic capacitor, 5mm spacing, max diameter 10mm | EEU-FR1J471B | RAD FC 470/35 |
| 2 | C8, C14 | 470u/50V | electrolytic capacitor, 5mm spacing, max diameter 10mm | EEU-FR1J471B | RAD FC 470/35 |
| 2 | R6, R19 | 10R | Resistor 1/4W | RNF14FTD10R0CT-ND | METALL 10,0 |
| 6 | R7, R9, R10, R20, R22, R23 | 10k | Resistor 1/4W | RNMF14FTC10K0 | METALL 10,0K |
| 2 | R4, R17 | 1R | Resistor 1/4W | RNF14FTD1R00CT-ND | METALL 1,00 |
| 2 | R12, R25 | 1k | Resistor 1/4W | RNMF14FTC1K00 | METALL 1,00K |
| 4 | R1, R2, R15, R16 | 39R | Resistor 2W | PNP200JR-52-39R | 2W METALL 39 |
| 6 | R8, R11, R13, R21, R24, R26 | 499R | Resistor 1/4W | RNF14FTD499R | METALL 499 |
| 2 | R3, R28 | 4R7 | Resistor 2W | FMP200JR-52-4R7 | 2W METALL 4,7 |
| 2 | R5, R18 | 4k99 | Resistor 1/4W | RNF14FTD4K99 | METALL 4,99K |
| 2 | R14, R27 | 5k | Precision potentiometer, 10x5mm, 2.54mm pin spacing | 3266Y-1-502LF | 64W-5,0K |
| 2 | T1, T2 | BD912 | 497-7179-5-ND | BD 912 | |
| 2 | IC2, IC4 | LM317 | 296-35739-5-ND | LM 317-220 SG | |
| 3 | X1, X2, X3 | Terminal block, 3 positions, 5.08mm spacing | 281-1883-ND | ||
| 2 | IC1, IC3 | OP177P | OpAMP, DIP package | OP177GPZ-ND | OP 177 GP |
| 4 | KK5, KK6, KK7, KK8 | SK104-PAD | Fischer SK104 heat sink | FA-T220-64E-ND | V PR32/38,1 |
| 2 | VR1, VR2 | TL431 | 296-1290-1-ND | TL 431 TO92 | |
| 4 | Jumper | 2.54mm | 881545-1-ND | JUMPER 2,54GL SW | |
| 2 | Pin header 2 Pin | 2.54mm spacing | A26543-ND | MPE 087-1-003 | |
| 2 | Pin header 3 Pin | 2.54mm spacing | A26545-ND | MPE 087-1-002 |