This is the list of electronic parts needed for the SinCos PCB. Note that the links to suppliers should help you to find the right components. However we have no control over their inventory. Therefore it is possible that some of the parts are not available anymore or (even worse) some parts have been changed. Therefore it is important, that you check again that you order the right components.
| Part | Value | Package | Digikey | Reichelt | C1 | 1uF | WIMA MKS02 | not available | MKS-02 1,0µ |
| C2 | 1uF | WIMA MKS02 | not available | MKS-02 1,0µ |
| C3 | 100nF | WIMA MKS02 | not available | MKS-02 100N |
| C4 | 100nF | WIMA MKS02 | not available | MKS-02 100N |
| C5 | 22pF | 399-9723-ND | KERKO 22P | |
| C6 | 22pF | 399-9723-ND | KERKO 22P | |
| C7 | 1uF | min. 16V, 2.5mm lead spacing | P5318-ND | SM 1,0/63RAD |
| C8 | 1uF | min. 16V, 2.5mm lead spacing | P5318-ND | SM 1,0/63RAD |
| C9 | 1uF | min. 16V, 2.5mm lead spacing | P5318-ND | SM 1,0/63RAD |
| C10 | 1uF | min. 16V, 2.5mm lead spacing | P5318-ND | SM 1,0/63RAD |
| C11 | 1uF | min. 16V, 2.5mm lead spacing | P5318-ND | SM 1,0/63RAD |
| C12 | 100nF | WIMA MKS02 | not available | MKS-02 100N |
| C13 | 100uF | min. 10V, 5mm lead spaning, max 8.5mm diameter | P15316CT-ND | RAD FR 100/50 |
| C14 | 0.33uF | WIMA MKS02 | not available | MKS-02 220N |
| C15 | 100nF | WIMA MKS02 | not available | MKS-02 100N |
| D1 | 1N4148 | or any other small signal diode | 1N4148VSCT-ND | 1N 4148 |
| IC1 | MEGA8-P | ATMega8-P, you may want to use an additional IC socket | ATMEGA88A-PU-ND | ATMEGA 8-16 DIP |
| IC2 | MAX232 | there are several versions on the market. Most will fit, but they may need other external capacitors (usually lower). Check the data sheet if you use another type than the CPE | 296-6940-5-ND | MAX 232 CPE |
| IC3 | LM7805 | or any compatible type | LM7805CT-ND | µA 7805 |
| K1 | G6K-2P | Omron relay, 5V | Z116-ND | G6K-2P 5V |
| KK1 | SK104 | Heat sink SK104 (only needed if you want to sourceadditional circuits from the 5V power supply) | 294-1024-ND | V PR32/25,4 |
| LED1 | LED 5mm | 751-1114-ND | LED 5MM ST GE | |
| LED2 | – | LED 5mm | 751-1148-ND | LED 5MM ST GN |
| LED3 | – | LED 5mm (only needed if you do not use the relay) | 751-1139-ND | LED 5MM ST RT |
| P1 | 100k | Trimmer 100k, 2.5mm lead spacing | 987-1488-ND | 64W-100K |
| P2 | 100k | Trimmer 100k, 2.5mm lead spacing | 987-1488-ND | 64W-100K |
| P3 | 10k | Trimmer 10k, 2.5mm lead spacing | 987-1489-ND | 64W-10K |
| P4 | 100k | Trimmer 100k, 2.5mm lead spacing | 987-1488-ND | 64W-100K |
| P5 | 100k | Trimmer 100k, 2.5mm lead spacing | 987-1488-ND | 64W-100K |
| Q1 | 14.745MHz | Crystal HC49U70, 14.745MHz | XC1747-ND | 14,7456-HC49U-S |
| R1 | 100k | 0207/7 | 100KXBK-ND | METALL 100K |
| R2 | 100k | 0207/7 | 100KXBK-ND | METALL 100K |
| R3 | 100k | 0207/7 | 100KXBK-ND | METALL 100K |
| R4 | 10k | 0207/7 | 10.0KXBK-ND | METALL 10,0K |
| R5 | 10k | 0207/7 | 10.0KXBK-ND | METALL 10,0K |
| R6 | 100k | 0207/7 | 100KXBK-ND | METALL 100K |
| R7 | 1k | 0207/7 | 1.00KXBK-ND | METALL 1,00K |
| R8 | 1k | 0207/7 | 1.00KXBK-ND | METALL 1,00K |
| R9 | 1k/10k | 1k or 10k, if you want to use the relay, use 10k | 10.0KXBK-ND | METALL 10,0K |
| SV1 | Taster | Pin header 10pin | A104906-ND | WSL 10G |
| SV2 | ISP | Pin header 10pin | A104906-ND | WSL 10G |
| SV3 | LCD | Pin header 14pin | A104860-ND | WSL 14G |
| T1 | BC547 | or any other pin compatible BJT transistor | BC547CTACT-ND | BC 547A |
| U$1 | CONN-3 | Pin header 3pin | A19430-ND | PS 25/3G WS |
| U$2 | CONN-2-3.5 | Screw terminal, 3.5mm | A98036-ND | AKL 059-02 |
| U$3 | CONN-3 | Pin header 3pin | A19430-ND | PS 25/3G WS |
| U$5 | CONN-2-3.5 | Screw terminal, 3.5mm | A98036-ND | AKL 059-02 |
| X1 | Serial | DB-9 Connector | A35109-ND | D-SUB BU 09US |
Pingback: Part lists for SinCos and MegaPower DP online | Crazy Audio