The 3D files for the modified Pibow case that can accommodate a Raspberry Pi and HiFiBerry DAC (the RCA version). It can be downloaded from Thingiverse.
Print the layers by yourself our let it produce by a 3D printing service. You might also remix it for any use you like.
This is a preview of the modded Pimoroni case with additional layers for the HiFiBerry DAC. We will release the STL files soon.
This is a modification of the Pibow case for the HiFiBerry DAC. We will release the STL files when it is finished for “print-your-own-case”. Only the layers 1-4 can be used without modification, therefore it might be the best idea to print all layers.
Here comes another nice HiFiBerry DAC installation. Jens from Germany doesn’t like switching mode power supplies for audio. Therefore he created a HiFiBerry setup with a huge linear power supply. Note that the power supply needs to provide at least 5V/1A for a stable operation of the Raspberry Pi. Depending on the input voltage this means heat. He uses a large heat sink and a small ventilator to get rid of the heat.
A HiFiBerry user has written a nice blog post how to build a music player based on the Raspberry Pi and the HiFiBerry DAC. Check out his page!
We received a lot of pictures of DIY HiFiBerry projects. We will show some of them here from time to time. However, there are more than we can show here. Therefore we have started a “user gallery” on our HiFiBerry website. Have a look at it!
Do you also want to show your creation? Send us your pictures!
Here is another nice case that a HiFiBerry DAC user built:
Have a look at the nice details, e.g. the doors hiding the HDMI connector. There are more pictures here: https://www.dropbox.com/sh/xfqtr2hpkhmwfz0/ioV-QRo35g#/
Please do not steal Lego bricks from your children!
Have a look at this nice setup of a Swiss HiFiBerry DAC user. He used an old amplifier and added a Raspberry Pi, the HiFiBerry DAC and a wireless stick to create a very cool streaming audio player.